Other SMS Command for Concox GT06N GPS Tracker

Other SMS Command for Concox GT06N GPS Tracker

Continuing the initial GT06N setting command, we will discuss the other SMS commands:

1. Command to shut down and start the engine

• Only through the center number can turn off and turn on the engine.
• Engine shutdown command:
  RELAY,1#
• Engine start command:
  RELAY,0#

2. Viewing the parameters on the GT06N

• Check parameter settings:
  PARAM#
• Reply:
  IMEI: 353419032348877;
  - Device IMEI number;
  GPRS Interval: 10,10;
  - GPS data transmission interval via GPRS;
  SENDS: 5;
  - GPS time works when ACC is off;
  SOS: 15942703401;
  - SOS number for receiving alarms, a maximum of 3;
  Center Number: 15942703401;
  - Only 1 center number for the command to turn off and start the engine;
  Sensoralm: 10,3,1,180;
  - Detects 3 vibrations in 10 seconds; alarm delay time is 180 seconds;
  Defense time: 10;
  - After 10 minutes ACC power off will enter alarm standby mode;
  TimeZone: E,8,0;
  - Time zone setting; The default is E8.

3. Viewing battery status, GPRS, GSM, GPS

• Check Status:
  STATUS#
• Reply:
  Battery: 3.99V, NORMAL;
  - 3.99 V battery voltage, normal functioning
  GPRS: Link Up;
  - GPRS is well connected and can send location data to the server
  GSM Signal Level: Strong;
  - Strong GSM signal
  GPS: Successful positioning;
  - The device gets a good GPS signal
  SVS Used in fix: 9(11);
  - Number of connected GPS satellites
  GPS Signal Level: 34,22,35,34,37,30,23,33,38;
  - GPS signal level is strong
  ACC: OFF;
  - Car engine condition is off (ACC off)
  Defense: OFF;
  - Under normal conditions, not an alarm standby mode

4. Restore factory settings

• FACTORY#
  Reset all parameter settings to factory default

5. Reboot the device

• RESET#
  If there is something such as the device unable to send the location, do a reset

6. Over speed alarm

• SPEED,3,120#
  If the car moves more than 120 km per hour within 3 minutes, the device will send an over speed alarm